Rane MP 24Z Instruções de Operação descarregar pdf (Página 2)

Manual-2

FRONT PANEL DESCRIPTION

햲 POWER “ON” indicator: Illuminates anytime the MP 24z is connected to an appropriate power source (see , Rear

Panel).

햳 SOURCE CONTROL selectors: Provide Input selection between the various Phono and Line Inputs for their respective

mixing Channels.

햴 Input channel faders: Control the relative Levels of each of the four Input mixing Channels.

햵 Channel CUE selectors: Engaging any single or combination of CUE pushbuttons sends any program present at the

respective Channel’s SOURCE CONTROL selector to the Headphone Cue section. The yellow LEDs adjacent to each CUE

select button illuminate when the switch is engaged.

햶 CROSSFADE ENGAGE switch: Activates the CROSSFADER and disables manual mixing capabilities. The adjacent

green LED illuminates whenever the Crossfader is active.

햷 Left-hand CROSSFADE ASSIGN switch: Assigns the left side of the Crossfader to any of the four Input Channels when

the Crossfader is activated by its ENGAGE switch.

햸 Right-hand CROSSFADE ASSIGN switch: Assigns the right side of the Crossfader to any of the four Input Channels

when the Crossfader is activated by the ENGAGE switch.

햹 ACTIVE CROSSFADER: Controls the Levels of any two Channels assigned to it by the left and right Crossfade ASSIGN

switches when the ENGAGE switch is activated. The entire Crossfader assembly is replaceable from the front panel

without disassembling the entire unit. (See Service Information on page Manual-9.)

햺 ENGAGE MIC switch: Enables the Microphone Inputs to feed the Booth, Zone, and Main Outputs. The adjacent red LED

flashes whenever the ENGAGE MIC switch is down and locked. This switch also activates a “ducker” circuit in the Booth

Output.(SeeFront Panel 헁 and Rear Panel 헆.)

햻 MAIN MIC LEVEL control: Sets the Level of the balanced low impedance MAIN MIC Input.

햽 AUX MIC LEVEL control: Sets the Level of the unbalanced high impedance AUX MIC Input, most often used for

wireless mics.

햾 Microphone equalization controls: Adjust the frequency contour of both Microphone Inputs. They have no effect on any

other program material.

1 2 3 4 5 6 7 8 9

Sem comentários

Rane MP 24Z Instruções de Operação Página 2