Rane MP 2016 Manual do Utilizador descarregar pdf (Página 7)

Manual-7

OPTIONAL XP 2016 EXTERNAL PROCESSOR

Combining the optional XP 2016 EXTERNAL PROCES-

SOR with the MP 2016 adds three-band, full-cut, Acceler-

ated-Slope™ tone controls and A-POST-B Crossfader Assign

switches for each of the six Input Channels, high-perfor-

mance Active-Crossfader™, with full-range Contour control

and a stereo 10-segment peak dBu Master/Cue Meter with

peak hold. With these added features, the system accommo-

dates the diverse needs of virtually all DJ mixing styles.

The post MIX LEVEL signals from the MP 2016 are

routed to the XP 2016, processed by the tone controls, then

assigned to the A side of the fader, B side of the fader or post

fader. The mixed signal is returned to the MP 2016. If the

XP 2016 engage switch is active, the MASTER signal gets

the XP 2016 mix. If the XP 2016 engage switch is not active,

the MASTER signal gets the normal MP 2016 mix.

CHANNEL 1-6 TREBLE

Allows adjusting the amplitude of frequencies above 4

kHz from +10 dB to OFF (full kill).

CHANNEL 1-6 MID

Allows adjusting the amplitude of frequencies between

300 Hz and 4 kHz from +10 dB to OFF (full kill).

CHANNEL 1-6 BASS

Allows adjusting the amplitude of frequencies below 300

Hz from +10 dB to OFF (full kill).

CHANNEL 1-6 A/POST/B assign

These switches assign each of the six input channels to the

A side of the Crossfader, B side of the Crossfader or POST

Crossfader

CROSSFADER

This implements using Ranes’ proprietary Active

Crossfader™ design. All audio is isolated from the control

element, greatly extending the life and performance of the

control. See page Manual-8 for cleaning and replacement

instructions.

CROSSFADER CONTOUR

This control allows adjusting the “shape” of the

Crossfader response from a gentle curve for smooth, long

running fades, to the steep pitch required for top performance

cut and scratch effects. (See the graph in the Data Sheet.)

PEAK PROGRAM/CUE METER

The stereo 10-segment Meter on the XP 2016 monitors

the same signal as the headphones. If MASTER is selected as

the source, the Meter will indicated the MASTER signal level

before the HOUSE and BOOTH level controls. If CUE is

selected as the source, the meter will indicate the level of the

selected CUE signal.

PWR indicator

This yellow indicator lights whenever AC power is

connected to the unit.

1 2 3 4 5 6 7 8

Comentários a estes Manuais

Sem comentários

Rane MP 2016 Manual do Utilizador Página 7

Comentários a estes Manuais

Manuais e produtos relacionados com Áudio Rane MP 2016