Rane SP 15 Manual do Operador descarregar pdf (Página 25)

Absolute Mode

ABS mode is the default mode, and

most closely resembles the properties of

normal vinyl. The beginning of the track

is mapped to the start of the record, and

by picking up the tone arm and moving

the needle to another part of the record

(needle dropping) you can move to a

different position within the track.

ABS mode faithfully reproduces the

movement of vinyl control records,

including stops, starts, scratching, needle

dropping, rubbing and other turntablist

techniques.

When you reach the end of the record

using either REL or ABS modes, Scratch

Live automatically switches to INT mode.

This is known as Emergency Internal

mode, and prevents long tracks from

stopping when you run out of record.

You can switch from Emergency Internal

mode to ABS mode by lifting the needle

and placing it in the lead-in of the control

record. Emergency Internal mode will

activate after 1 second. Use the keyboard

shortcut F1 (left deck) or F6 (right deck) to

switch to ABS mode.

NOTE: Be careful when scratching

near the end of the record not to

accidentally go past this point and

into internal mode, or the track will no

longer respond to record movement!

Relative Mode

REL mode observes the relative forward

and backward movement of the record,

but does not take into account the

position within the record. REL mode

disables needle dropping, but allows skip-

free scratching.

See: “Drop To Absolute Position” on

page 44.

REL mode adds additional speed

controls:

Previous track – Go to the previous

track in the list.

Rewind - The rewind function

speeds up the longer you press the

button.

Fast forward – The fast forward

function speeds up the longer you

hold the button.

Next track – Jump to the next track

in the list.

TIP: Use the keyboard shortcut F2 (left

deck) or F7 (right deck) to switch to

REL mode.

Internal Mode

INT mode allows playing tracks without

external vinyl (or CD) control. INT mode

has a start / stop function and a virtual

pitch slider. Holding down the shift key

moves the pitch slider slowly. Holding the

ctrl key and clicking on the pitch slider

resets the pitch to zero.

Scratch Live automatically switches

to INT mode when the end of the control

record is reached; you can switch back

to REL mode by placing the needle in the

rst ve minutes of the control record.

If you switch from ABS or REL into INT

mode, Scratch Live automatically adjusts

pitch to maintain playback speed as

set by the turntable. Use the keyboard

shortcut F3 (left deck) or F8 (right deck) to

switch to INT mode.

INT mode adds these additional controls:

Play / pause reverse - Press to

play, press again to stop playback.

You can adjust the braking knob in the

setup screen to range from an immediate

stop to a slow turntable-style ‘power

down’. See “Braking” on page 43.

Play / pause forward - Press to

play, press again to stop playback.

Uses the same braking as described

above.

Bend down - Create a temporary

decrease in the playback speed.

Use bend down if the two tracks are in

time, but this track is slightly ahead of the

other track.

Bend up - Create a temporary

increase in the playback speed. Use

bend up if the two tracks are in time, but

this track is slightly behind the other track.

RANE SIXTY-TWO MIXER FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.5.0

25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 59 60

Comentários a estes Manuais

Sem comentários